Articalize Directory | Free Articles | New Articles Daily

If you are a small business proprietor and you are thinking about a baler for your plastic waste you genuinely should mull over the following points.

First of all you should seriously look at the size of baler most appropriate for your requirements. Most company's will be looking at a small baler in order to maintain expenses to a minimum. There are several baler companies to choose from and nearly everyone of them have a very fundamental disadvantage. Most small balers are too small.

Commonly, on the majority of vertical balers, the pressing plate goes down to just below the top of the bottom door, in its pressing cycle. Also, when the plate comes back up, the plastic has a memory and it also wants to rise up with the plate. If you use a small baler, this will mean you can’t put much plastic into your baler each time you load it.

The V40 Baler from Strong Recycling Balers Ltd, has a very special feature. The piston ram in this baler is much longer. The pressing plate goes a lot deeper down inside the baler. You get a superior compaction, the compaction starts earlier and when the pressing plate rises, the baled plastic does not rise so far. This means you can load up much more plastic into the V40 Baler than any other small baler. Most small balers will make plastic bales up to 50kg. The V40 will make plastic bales of more than 80kg. Some users will even get 100kg bales out of this incredible machine.

While you will use the baler on “auto”, for most of the time, there is an added feature, where you can change the operation to manual and send the pressing plate down. It will then stay down until you turn the operating switch to the “up” position. When the baler is getting full of plastic waste, you can manually operate the baler and leave the plate pressing down. It helps to break down the memory of the plastic.

The baler is very quiet and runs off a standard 13amp 220 volt power supply. It only draws a low electrical current when working and will not function with the door open, making it totally safe. There is a very intelligent relay system and the features ensure that there is no excessive stress on the motor or other parts. The superior system design ensures the baler will last for many years.

The suppliers of the V40, is Strong Recycling Balers Ltd. They have developed a Unique Bale Collection System in the UK. It means that any client who bales a lot of clear plastic polythene and shrink-wrap, anywhere in Wales, can receive a very good revenue from it. Strong Recycling Balers Ltd, can arrange collections of plastic bales anywhere in England and Wales. They will organize for you to have straightforward collections, Waste Transfer Notes and Very Good Incomes. The values of plastic bale waste can change and you should constantly be conscious of this. At the time of writing this article (24 April 2010), Strong Recycling Balers can easily get £200 per ton for clear plastic polythene bales. Even better still is the value of Mill Size Bales. If you have a Mill Size Baler and can produce half-ton clear plastic polythene or shrink-wrap bales, at the time of writing this article (24 April 2010), Strong Recycling Balers can easily get you £270 per ton.

If you really produce large quantities of plastic then possibly the V500 is going to be more suitable for you. The V500 Mill Size Baler will make larger than 500kg plastic bales. Mill Size Balers can be very costly. One of the most competitively priced mill size balers in the UK, is the V500 from Strong Recycling Balers Ltd. It is currently priced around £7,900. You can lease this Mill Size Baler from about £39 per week.

You can find “Strong Recycling Balers” on any major search engine. They are based in the West Midlands and the balers are manufactured locally.

Strong Recycling Balers gives Free Delivery, Free 7 Day Trial, Free Training, Free 12 Month Warranty and a good supply of Free Baler Twine. For the Mill Size Baler you will use wire ties and a good supply will be provided to get you started.

To sum up: Before you get yourself a baler which doesn’t suit your needs 100%, have a word with the Managing Director of Strong Recycling Balers, on Free phone 0800 5677 384. The V Range of balers is truly perfect for Cardboard, Plastic, Polypropylene, Shredded Paper and many other materials.